• The Summer Undress Blue Bravo uniform consists of the Coast Guard ("CG") blue cotton/poly work pants, and the short sleeved light blue (Air Force style) shirt with epaulets.  Wear collar devices and the pin-on name tag.  Do not wear shoulder boards or ribbons.  Wear the blue CG Auxiliary baseball cap with a collar device.  Only wear V-neck undershirts with this uniform.

• The Working Blue uniform consists of the Coast Guard ("CG") blue cotton/poly work pants, and the short sleeved CG (dark) blue shirt without epaulets.  Wear collar devices and the pin-on name tag.  You can replace the name tag with sewn on name cloth tapes with your name and "USCG AUXILIARY."  Do not wear shoulder boards or ribbons.  Wear the blue CG Auxiliary baseball cap with a collar device.  Only wear V-neck undershirts with this uniform.

• For both of these uniforms, consider removing you name tag before donning a PFD/Life Jacket.  The name tag can get caught on the inside of the PFD, and if you are hit while wearing it (or collar devices) the pins in the back penetrate skin very well.

Where do I get the uniform?

    Auxiliarists with a current, laminated ID card with photo have access to CG exchanges for any and all purchases except alcohol and tobacco.  Axiliarists can use DOD (Army, Navy, Marine Corps, Air Force) exchanges to purchase uniform items and accessories only.
    The Auxiliary also has its own stores in each district which do business via mail order and set up a store at the district conference.  For a catalog/price list, see your FSO-MA.
    Some private companies also sell CG and Auxiliary uniforms.
    Shop around for the best prices between the various outlets.

Uniform Distribution Center Website

Lighthouse Uniform Company Website

The Care and Feeding of Uniforms

From Tasha VanEs, USCGAUX:
Working blue shirts and sew-on devices:
It is a good idea to wash your working blue shirts along with new name tapes before you sew on the name. In other words, if you get a new shirt and new name tape, throw both into the washer/dryer a few times before you actually get the tapes affixed to the shirt. The reason for this is that the shirt and tape may not wear the same way, and you might end up with a name tape that makes the shirt all wrinkly around the edges. A CG Petty Officer recommended this, and suggested the wash process be done at least 3-4 times before you go sewing on the tapes.

Use and maintenance tricks from Flotilla members or learned by trial and error.

• Devices: Name tags and certain devices can be prevented from "flopping" by using a backing. Vanguard makes (and exchanges carry) backing material, which you wear inside the shirt, cut to the device size. As an alternative, use thin cardboard or plastic, such as that from a margarine container lid.  The auxiliary manual contains instructions on where on the uniform they should be positioned.  If you have any questions about proper placement, just ask!
• Covers: Hats, or covers, are to be worn squarely on the head, not tilted back or to the side. Hair or bangs should not be visible below the brim or hatline of the cover. Long hair should be up and away from the collar and contained under the hat, not sticking out the back. Covers should always be worn outdoors, and removed indoors.
• Shirts:  -- Putting creases in your shirts, from Dan Desai --
  • For the front of the shirt, use the pocket flap buttons as a guide for where to place the crease, and have the crease run parallel to the buttons down the shirt from the collar to the tails/bottom. Thus, you will end up with 2 creases down the front of the shirt.
  • For the back of the shirt, find the center of the shirt, and crease from about 2 inches below the collar to the bottom. Take a dollar bill and place it spread out lengthwise to each side to find the side creases. These creases will begin about an inch lower than the primary crease and go to the bottom. Thus you will end up with three back creases.
  • Don't forget to press the sleeves!
• Shoes/Boots: Keep your black shoes shiny! Total investment under 5 bucks. Here's how:
  • The Exchanges should have a few things you need: Polish, a Shoe brush, a rag, and of course, your shoes (they're not included in the price quote).
  • Read the directions on whatever black polish you pick. If they differ, follow their directions, not mine. Basically, you apply a thicker layer first, allow it to dry for a few minutes, then brush that layer to create the base. Not much shine will appear after this layer. Then, you apply a thin layer, you don't need to let it dry. By gently sprinkling water on the new layer, then buffing it with a soft cloth, you will begin to develop a nice shine. You can repeat a few times if necessary. The only caveat in this process is, if you go too crazy with the buffing, you'll actually overbuff your shoes, lose the shine, and have to start over.
• Belt and Buckle: The belt should be cut such that there is not a long "tail" left over. In fact, the silver end of the web belt should just slide through your buckle enough so that it appears an uninterrupted chunk of silver at the buckle.

• Wear a hat whenever you are out of doors and not seated.  If you are in a covered place (i.e. building with a roof) you need not wear you own cover (i.e. hat).
• On board ship, always remove your hat when entering the sick bay or when eating.
• Never wear a hat on a flight line or anywhere else it could be a safety hazard

• When - if you are wearing a hat or should be
• Who? - Any officer (CG, other US military, USPHS, NOAA, allied military) who "out-ranks" you.  While Auxiliarists are civilians and do not hold "rank", use the rank equivalent of your office to determine who to salute.  For example, a FSO wears one silver stripe on a shoulder board or sleeve lace, or a gold bar collar device.  A CG/Navy Ensign (O-1) wears a single gold stripe on boards or sleeve, along with an Army/AF/USMC Second Lieutenant (O-1), wears a gold bar collar device.  A FSO would salute anyone ranking a CG ensign.
• How do I recognize an officer? Look for gold sleeve striping around the cuff of the jacket, shoulder boards with gold braid stripes, or officer collar devices.
• Officer collar devices - While enlisted persons wear chevrons, with a shield if in the CG, and chief petty officers wear anchors, officers wear gold or silver bars, oak leaves, eagles, and (for admirals and generals) stars.
• How do I salute? - bring your right hand to your right temple, generally horizontal but with the back of the hand a little bit forward.
• When do I start saluting - At a distance from the officer at which you might make a greeting.  It is not improper to accompany your salute with a "good morning, sir!" or something similar.
• When do I stop? - Stop saluting when the officer you are saluting returns your salute.

• Return any salutes you receive.
• Return the salute, then stop saluting.  The person saluting you will then drop their salute.
• Failure to return a salute is very rude.

• When boarding, upon arriving at the top of the walkway, turn and salute the flag, or in the direction of the flag if the flag at the ship's stern is not visible.  Then salute the officer in charge on the quarterdeck, and request permission to come aboard.
• When departing, salute the officer in charge on the quarterdeck, request permission to go ashore, turn and salute the flag, and go ashore.
• If you are not in uniform, the process is similar, but you do not salute.  Turn toward the flag but do not salute.  Request permission of the quarterdeck officer without saluting to come aboard and go ashore.
• If entering as part of a work party, one person salutes and makes the request to board/depart